FLICKER FREE HMI LIGHTING REPAIR SINCE 1989.
MOTION PICTURE - TELEVISION - VIDEO

NEW

Specials... 

Preventive Maintenance Service (PMS)

hmi lighting repair

Special cost from $35.00 to $70.00 for each unit. 

Cables:              $35.00 ea.

Tungsten:          $40.00 ea.

Fluorescent:      $50.00 ea.

HMI Units:          $70.00 ea.

(includes all parts under $5.00)

WHY IS PREVENTIVE MAINTENANCE SERVICE NECESSARY?

Preventive Maintenance Service (PMS) is essential to the proper function of your Lighting Equipment; it is aimed at the prevention of breakdowns and failures. PMS is conducted to keep equipment working and/or extend the life of your Lighting Equipment. Without PMS, for example, costs for lost production time from unscheduled equipment breakdown will be incurred. Also, PMS will result in savings due to an increase of effective system service life.

The primary goal of PMS is to prevent the failure of equipment before it actually occurs. PMS activities include complete equipment inspection, during these inspections, proper operation of the equipment is checked and verified. It is designed to preserve and enhance equipment reliability by replacing worn components before they actually fail.

All Lighting Equipment is designed to operate within certain limits, and if not properly maintained, the equipment will exceed its design limitations with the result being equipment failure. If PMS is not performed regularly (at least 1-2 times a year), the equipment will require extensive and costly repairs at a later date. This is not just a case of "pay me now or pay me later. " It is a case of "pay me now or pay me considerably more, later," and loses reliability in the process.


Call or e-mail us for more details or questions.

.

.

.

Now you can convert your HMI 1200w ARRI from 1200w Par 64 (Par64) HMI Sealed Beam Lamp to 1200w S/E (single ended) HMI Lamp. Starting at $495.00 ea. (1200w S/E Lamp/ Globe not included)

Sandblasting & powder coating are also available to same original color, as shown below.  All conversions are done through Advance Motion Picture Lightng in North Hollywood, CA  Call Eddie at (818) 768•5514 for S/E Lamp Conversion details.

.

.

OTHER SPECIALS:

CONNECTOR CONVERSION

REPLACE YOUR OLDER STYLE HMI LAMP FIXTURE CONNECTOR TO A NEWER STYLE, SO YOU CAN RUN IT WITH A NEWER STYLE BALLAST, SUCH AS A 575/1200W POWER GEMS ELECTRONIC BALLAST OR A 575/1200W ARRI ELECTRONIC BALLAST.  (PICTURE ABOVE SHOWS A 1200W HMI TYPE 6221 MOLEPAR AND A 1200W HMI TYPE 6321 MOLEFRESNEL MODIFIED WITH LTM CONNECTORS TO RUN WITH A 575/1200W POWER GEMS ELECTRONIC BALLAST)  575W, 1200W, 2500W OR 4KW CONVERSION COST:  $195.00 (INCLUDES PARTS & LABOR)

 

 

jOKER HMI

K5600 JOKER CABLE REPLACEMENT

REPLACE YOUR OLD TWISTED AND TANGLED CABLE WITH A BRAND NEW CABLE.  IF YOU HAVE AN OLDER STYLE JOKER 200W OR 400W HEAD WITH TANGLED OR TWISTED CABLE IT MAKES IT VERY DIFICULT TO USE AND YOU ONLY END UP USING ABOUT 4FT TOTAL.   REPLACE IT WITH A BRAND NEW 10FT (3m) CABLE, WE USE YOUR SAME USED CONNECTOR AND JUST REPLACE THE OLD CABLE.  200W OR 400W CABLE REPLACEMENT COST:  $95.00 (INCLUDES CABLE & LABOR) ALSO, FOR AN EXTRA CABLE LENGTH CHARGE, YOU CAN HAVE THE CABLE TO ANY LENGHT YOU WANT! UP TO 33' (10m)

.

AND MUCH MORE: 

LIGHTMAKER 575/1200W AC ELECTRONIC BALLAST FAN UPGRADE.

INCREASE THE LIFE OF YOUR BALLAST BY INCREASING THE AIR VELOCITY (UP TO 60% MORE AIR FLOW).

YOUR BALLAST WILL BE HAPPIER AND TREAT YOU BETTER!

COST:  $45.00 (INCLUDES PARTS & LABOR)

.

LIGHTMAKER (OLDER STYLE) 575/1200W AC/DC ELECTRONIC BALLAST FAN INCREASE (WITHOUT REPLACING FAN).

INCREASE THE LIFE OF YOUR BALLAST BY INCREASING THE AIR VELOCITY (20% MORE AIR FLOW).

YOUR BALLAST WILL BE HAPPIER AND TREAT YOU BETTER!

COST:  $35.00 (INCLUDES PARTS & LABOR)



POWER GEMS 575/1200W AC ELECTRONIC BALLAST FAN UPGRADE.

INCREASE THE LIFE OF YOUR BALLAST BY INCREASING THE AIR VELOCITY (30% MORE AIR FLOW).

YOUR BALLAST WILL BE HAPPIER AND TREAT YOU BETTER!

COST:  $45.00 (INCLUDES PARTS & LABOR)



SUNRAY 575/1200W AC ELECTRONIC BALLAST FAN UPGRADE.

INCREASE THE LIFE OF YOUR BALLAST BY INCREASING THE AIR VELOCITY (50% MORE AIR FLOW).

YOUR BALLAST WILL BE HAPPIER AND TREAT YOU BETTER!

COST:  $45.00 (INCLUDES PARTS & LABOR)